Multipoint Hardware

Need Hoppe replacement parts? Click here


Hoppe Multipoint Door Hardware

Hoppe Multipoint Door Harware

WHAT IS MULTIPOINT?

The best way to describe multipoint door locking hardware is to contrast it with the more common single point hardware found on most doors.

  • A single point mortise lock consists of a latch and deadbolt only. The deadbolt provides the single locking point between the door and jamb.

  • A multipoint mortise lock has multiple locking points which simultaneously lock into place through the action of a continuous travel drive rail. This drive rail is usually activated by lifting the door handle. We offer a shootbolt system which provides three locking points:
    • at the deadbolt,
    • at the top shootbolt (where it enters the top jamb),
    • and at the bottom shootbolt (where it enters the sill).

ACTIVE DOORS VS. INACTIVE DOORS

  • Active doors use different hardware than inactive doors.

  • An active door is either a single door, or the primary functioning door in a pair of French doors (the door that opens first). The latch and deadbolt will always be part of the active door hardware.

  • An inactive door is the secondary functioning door in a pair of French doors. This door can only be opened after the active door has been opened.


 


Hoppe Multipoint Hardware Terminology

WHAT WE OFFER:

We offer two kits below - one for an active door and one for an inactive door - that have been configured to fit common door sizes.

  • Each kit contains all gear components required. This saves you from ordering all the pieces separately, such as the drive rails, lock case and shootbolts.

  • Trim is not included in these kits. Trim includes handles, backplates, and the lock cylinder. We can supply trim from Hoppe or other manufacturers that will fit this gear.

  • Click on items below for more details


PACKAGE SPECIAL:

Purchase any multipoint door kit and add the eurogroove stepped router bit for only $67.20, that's 20% off! Simply check the box next to "Add Eurogroove Router Bit" on the Multipoint product page, no codes or coupons needed!

Latch and Deadbolt Strike
[Contact us for a price]
Hoppe

Latch and Deadbolt Strike Product Description:   More 

1 item(s)

Hoppe Automatic Four Roller Gear for 45mm Backset, 1in Deadbolt Throw

CODE: 8778943

[Contact us for a price]

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Convenience Key

CODE: 2667482

$7.00
Hoppe

Product Description: Convenience Key Useful when testing lock without trim installed.   More 


Hoppe Constuction Key

CODE: 8750635

$12.88
Hoppe

Product Description: Hoppe Construction Key Useful when testing lock without trim installed. This key can also be used for measuring sizes of... More 


Pin Cap for CES, Bag of 10

CODE: 8771719

$15.00
Hoppe

Product Description: Pin Cap for CES This is a replacement cap for rekeying a CES profile cylinder. Ten are sold for $15 together... More 


Hoppe Construction Door Set with Construction Key

CODE: 2605353

$35.00
Hoppe

Product Description: Hoppe Construction Door Set with Construction Key Catalog #2605353... More 


Half Profile Cylinder with Crescent Turn Knob

CODE: Half PC

$44.36
Hoppe

Product Description: Half Profile Cylinder with Crescent Turn Knob 90 Degree Rotation, Crescent turn knob inside.... More 



Full Profile Cylinder

CODE: PC

$66.45
Hoppe

Product Description: Full Profile Cylinder 90 Degree Rotation, Keyed outside, crescent turn knob inside. 31.5mm x 31.5mm... More 


Hoppe Eurogroove Router Bit

CODE: 94-08-834

$80.00
Whiteside

Product Description: Eurogroove Router Bit for Hoppe Multipoint Catalog #94-08-834 This "eurogroove" router bit is used to... More 


Hoppe Manual Tongue/Shootbolt Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778311

$82.00

Please note  that this item includes both the multipoint gear and the bottom extension.   More 


Hoppe Automatic Two Roller Gear for 45mm Backset, 1in Deadbolt Throw

CODE: 8778295

$85.70

Please note  that this item includes both the multipoint gear and the bottom extension. Please Call for more information including price and... More 


Hoppe Singlepoint Mortise Lock 45mm Backset and 25.4mm Deadbolt Throw (Shipping Included)

CODE: 11517499

$86.65

Product Description: Hoppe Singlepoint Mortise Lock 45mm Backset and 25.4mm Deadbolt Throw Catalog #8777959 Other Backsets are... More 


Hoppe Manual Tongue Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778167

$94.70

Please note that this item includes both the multipoint gear and the bottom extension. The last step is to choose the bottom tongue position... More 


Hoppe Manual Tongue/Shootbolt Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778238

$93.32

Please note  that this item includes both the multipoint gear and the bottom extension.   More 


Hoppe Manual Tongue Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 2423904

$94.70

Please note that this item includes both the multipoint gear and the bottom extension. The last step is to choose the bottom tongue position... More 

10 item(s)

Hoppe Manual Tongue Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778147

$94.70

Please note that this item includes both the multipoint gear and the bottom extension. The last step is to choose the bottom tongue position... More 

6 item(s)

Hoppe Manual Tongue Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8779123

$94.70

Please note that this item includes both the multipoint gear and the bottom extension. The last step is to choose the bottom tongue position... More 


Hoppe Manual Two Roller Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778255

$94.70

Please note  that this item includes both the multipoint gear and the bottom extension. If you need a replacement Top Extension... More 


Hoppe Manual Two Roller Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778511

$94.70

Please note  that this item includes both the multipoint gear and the bottom extension.   If you need a... More 


Hoppe Manual Two Roller Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778223

$94.70

Please note  that this item includes both the multipoint gear and the bottom extension.   If you need a... More 


Hoppe Manual Two Roller Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778279

$94.70

Please note  that this item includes both the multipoint gear and the bottom extension. If you need a replacement Top Extension... More 


*SPECIAL Hoppe Munchen Solid Resista Brass Multipoint Trim Inactive Set

CODE: M112PL/374N

$112.95   $95.00
-16%
Hoppe

Product Description: Munchen Solid Brass Multipoint Trim Inactive Set Catalog M112PL/374N Special Hoppe Munchen Resista Brass... More 


Hoppe Manual Four Roller Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778895

$101.46

Please note  that this item includes both the multipoint gear and the bottom extension.   If you need a replacement Top... More 

Loading...