Single & Multipoint Hardware

                                                          Need Hoppe replacement parts?

                                                                            Click Here

Hoppe Multipoint Door Hardware

Hoppe Multipoint Door Harware

WHAT IS MULTIPOINT?

The best way to describe multipoint door locking hardware is to contrast it with the more common single point hardware found on most doors.

  • A single point mortise lock consists of a latch and deadbolt only. The deadbolt provides the single locking point between the door and jamb.

  • A multipoint mortise lock has multiple locking points which simultaneously lock into place through the action of a continuous travel drive rail. This drive rail is usually activated by lifting the door handle. We offer a shootbolt system which provides three locking points:
    • at the deadbolt,
    • at the top shootbolt (where it enters the top jamb),
    • and at the bottom shootbolt (where it enters the sill).

ACTIVE DOORS VS. INACTIVE DOORS

  • Active doors use different hardware than inactive doors.

  • An active door is either a single door, or the primary functioning door in a pair of French doors (the door that opens first). The latch and deadbolt will always be part of the active door hardware.

  • An inactive door is the secondary functioning door in a pair of French doors. This door can only be opened after the active door has been opened.


 


Hoppe Multipoint Hardware Terminology

WHAT WE OFFER:

We offer two kits below - one for an active door and one for an inactive door - that have been configured to fit common door sizes.

  • Each kit contains all gear components required. This saves you from ordering all the pieces separately, such as the drive rails, lock case and shootbolts.
  • Trim is not included in these kits. Trim includes handles, backplates, and the lock cylinder. We can supply trim from Hoppe or other manufacturers that will fit this gear.
  • Click on items below for more details

 

 

Notice about Fuhr Replacement

Replacement for an existing Fuhr multipoint lock will now be a Hoppe Lock. Hoppe exposed locking mechanisms are completly stainless steel so a top to bottom replacement is recommended for compatability. It is important to carefully compare strike locations to determine if modifications are necessary. 

 



PACKAGE SPECIAL:

Purchase any multipoint door kit and add the eurogroove stepped router bit for only $68.00, that's 20% off! Simply check the box next to "Add Eurogroove Router Bit" on the Multipoint product page, no codes or coupons needed!

Inactive Flushbolt

CODE: 2792267

[Contact us for a price]

The inactive flushbolt version provides a simple solution for securing inactive panels of French doors. Edge-mounted, the lockset activates the rod... More 

1 item(s)

Tongue Strike - Flat

CODE: 8784707

$6.10

flat stainless steel, contact for additional finishes


Tongue Strike - Curved Lip

CODE: 1964522

$14.65

curved lip stainless steel, contact for additional finishes


Tongue Strike - Radius Lip

CODE: 2025199

$10.15

radius lip stainless steel, contact for additional finishes

1 item(s)

Shootbolt Strike

CODE: 2098911

$11.90

for single door non-handed stainless steel

1 item(s)

Latch & Deadbolt Strike Extended Curved Lip

CODE: 8787743

$52.95

extended curved lip non handed for larger offset panels stainless steel   Contact for other finishes More 

1 item(s)

Latch & Deadbolt Strike Curved Lip

CODE: 1963554

$21.45

curved lip non handed for 1-3/4" to 2-1/8" panel will work for some 2-1/4" doors, but may have to notch edge... More 


Latch & Deadbolt Strike Curved Lip for Inactive

CODE: 8787747

$25.35

curved lip with inactive cylinder hole non handed contains access hole for reaching the cylinder screw on inactive panel... More 

1 item(s)

Latch & Deadbolt Strike Extended Curved

CODE: 2014207

$22.00

extended curved lip non handed for centered 2-1/4" panels

1 item(s)

Latch & Deadbolt Strike Flat

CODE: 2242311

$21.35

for 1-3/4" panel non handed stainless   Contact for other finishes. More 


Spindle & Set Screw Kit

CODE: SPINDLE SET

$15.75

Spindle and set screw kit for 1 3/4" thick doors   Spindle - 100mm/4in; 2 each (517572) Stainless steel set screws - 2 each... More 


Hoppe HLS 7 Series Spring Cartridge Pair

CODE: 2702170

$17.50

Hoppe HLS 7 Series Spring Cartridge Pair Spring Cartridge is used to create tension in the lever. If the lever has lost tension, the spring... More 




Latch and Deadbolt Strike
[Contact us for a price]
Hoppe

Latch and Deadbolt Strike Product Description:   More 

1 item(s)

Hoppe Singlepoint Mortise Lock 45mm Backset and 25.4mm Deadbolt Throw (Shipping Included)

CODE: 11517499

$102.00

Product Description: Hoppe Singlepoint Mortise Lock 45mm Backset and 25.4mm Deadbolt Throw Catalog #11517499 Other Backsets are... More 


Hoppe Manual Tongue Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778183

$123.00

                                           ... More 


Hoppe Manual Tongue Gear for 70mm Backset, 25.4mm Deadbolt Throw

CODE: 2406371

$174.85

Hoppe Manual Tongue Gear for 70mm Backset, 25.4mm Deadbolt Throw                      ... More 


Hoppe Manual Shootbolt Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778339

$134.55

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Shootbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778331

$134.55

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Shootbolt Gear for 70mm Backset, 25.4mm Deadbolt Throw

CODE: 2406522

$180.45

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Two Roller Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778279

$121.25

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Tongue/Shootbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778263

$130.80

Please note  that this item includes both the multipoint gear and the bottom extension.   More 


Hoppe Manual Tongue Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 2423904

$123.00

                                           ... More 


Hoppe Manual Tongue Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778147

$123.00

                                           ... More 


Hoppe Manual Tongue Gear for 60mm Backset, 25.4mm Deadbolt Throw

CODE: 2406346

$174.85

Hoppe Manual Tongue Gear for 60mm Backset, 25.4mm Deadbolt Throw                      ... More 


Hoppe Manual Roller/Shootbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778843

$142.35

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Tongue/Shootbolt Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778311

$130.80

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Roundbolt/Shootbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778751

$198.75

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Roundbolt/Shootbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778755

$198.75

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Automatic Tongue Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778287

$142.05

                                           ... More 

2 item(s)

Hoppe Manual Two Roller Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778511

$121.25

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Four Roller Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778895

$128.75

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Four Roller Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778887

$128.75

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Four Roller Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778891

$128.75
Hoppe

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Shootbolt Gear for 60mm Backset, 25.4mm Deadbolt Throw

CODE: 2406514

$180.45

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Roundbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778259

$177.35

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Roller/Shootbolt Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778835

$142.35

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Roller/Shootbolt Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778839

$142.35

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Roundbolt/Shootbolt Gear for 60mm Backset, 25.4mm Deadbolt Throw

CODE: 2385283

$209.86

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Automatic Tongue Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778247

$142.05

                                           ... More 

2 item(s)

Hoppe Manual Two Roller Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778255

$121.25

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Roundbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778139

$177.35

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Tongue/Shootbolt Gear for 70mm Backset, 25.4mm Deadbolt Throw

CODE: 2406485

$188.25

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 

1 item(s)

Hoppe Manual Tongue/Shootbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778107

$130.80

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 


Hoppe Manual Tongue Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778075

$131.36

Hoppe Manual Tongue Gear for 45mm Backset, 25.4mm Deadbolt Throw                       ... More 


Hoppe Automatic Tongue Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778303

$142.05

                                           ... More 

1 item(s)

Hoppe Manual Two Roller Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778223

$121.25

Please note  that this item includes both the multipoint gear and the bottom extension.              ... More 

2 item(s)
Loading...