Multipoint Hardware

Need Hoppe replacement parts? Click here


Hoppe Multipoint Door Hardware

Hoppe Multipoint Door Harware

WHAT IS MULTIPOINT?

The best way to describe multipoint door locking hardware is to contrast it with the more common single point hardware found on most doors.

  • A single point mortise lock consists of a latch and deadbolt only. The deadbolt provides the single locking point between the door and jamb.

  • A multipoint mortise lock has multiple locking points which simultaneously lock into place through the action of a continuous travel drive rail. This drive rail is usually activated by lifting the door handle. We offer a shootbolt system which provides three locking points:
    • at the deadbolt,
    • at the top shootbolt (where it enters the top jamb),
    • and at the bottom shootbolt (where it enters the sill).

ACTIVE DOORS VS. INACTIVE DOORS

  • Active doors use different hardware than inactive doors.

  • An active door is either a single door, or the primary functioning door in a pair of French doors (the door that opens first). The latch and deadbolt will always be part of the active door hardware.

  • An inactive door is the secondary functioning door in a pair of French doors. This door can only be opened after the active door has been opened.


 


Hoppe Multipoint Hardware Terminology

WHAT WE OFFER:

We offer two kits below - one for an active door and one for an inactive door - that have been configured to fit common door sizes.

  • Each kit contains all gear components required. This saves you from ordering all the pieces separately, such as the drive rails, lock case and shootbolts.

  • Trim is not included in these kits. Trim includes handles, backplates, and the lock cylinder. We can supply trim from Hoppe or other manufacturers that will fit this gear.

  • Click on items below for more details


PACKAGE SPECIAL:

Purchase any multipoint door kit and add the eurogroove stepped router bit for only $60, that's 30% off! Simply check the box next to "Add Eurogroove Router Bit" on the Multipoint product page, no codes or coupons needed!

*Hoppe Multipoint Door Kit - Manual Shootbolt Gear for Active Door

CODE: 8778163

$195.65
Hoppe

* This Kit is not for replacement of existing locks, For Hoppe replacement parts please fill out the "HOPPE FUHR or HLS Swing Door... More 


*Hoppe Multipoint Door Kit - Manual Shootbolt Gear for Inactive Door

CODE: HP-MP-INACT

$165.44
Hoppe

*This Kit is not for replacement of existing locks, For Hoppe replacement parts please fill out the "HOPPE FUHR or HLS Swing Door... More 


*Special Hoppe Munchen Solid Resista Brass Multipoint Trim Active Set

CODE: M112PL/374N

$121.64   $99.00
-19%
Hoppe

Product Description: Munchen Solid Resista Brass Multipoint Trim Active Set Catalog M112PL/374N Active trim set w/ cylinders,... More 


*SPECIAL Hoppe Munchen Solid Resista Brass Multipoint Trim Inactive Set

CODE: M112PL/374N

$112.95   $95.00
-16%
Hoppe

Product Description: Munchen Solid Brass Multipoint Trim Inactive Set Catalog M112PL/374N Special Hoppe Munchen Resista Brass... More 


Full Profile Cylinder

CODE: PC

$52.14
Hoppe

Product Description: Full Profile Cylinder 90 Degree Rotation, Keyed outside, crescent turn knob inside. 31.5mm x 31.5mm.... More 


HLS 9000 Swing hook - Manual Gear System, Faceplate 16mm

CODE: 8778247

$196.71

Product Description: HLS 9000 Swing hook - Manual Gear System, Faceplate 16mm Offers Security in the locked position and the swing hook... More 

10 item(s)

HLS 9000 Swing hook - Manual Gear System, Faceplate 60mm

CODE: 8778247

$196.71

Product Description: HLS 9000 Swing hook - Manual Gear System, Faceplate 16mm Offers Security in the locked position and the swing hook... More 

10 item(s)

HLS 9000 Swing hook - Manual Gear System, Faceplate 70mm

CODE: 8778247

$196.71

Product Description: HLS 9000 Swing hook - Manual Gear System, Faceplate 16mm Offers Security in the locked position and the swing hook... More 

10 item(s)

Hoppe Automatic Tongue Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778247

$123.00

Step 4: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

4 item(s)

Hoppe Automatic Tongue Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778247

$123.00

Step 4: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

10 item(s)

Hoppe Automatic Tongue Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778303

$123.00

Step 4: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

10 item(s)

Hoppe Automatic Tongue Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778291

$123.00

Step 4: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

10 item(s)

Hoppe Dallas Solid Brass Multipoint Trim Active Set

CODE: M1643/2161N

$183.92
Hoppe

Product Description: Dallas Solid Brass Multipoint Trim Active Set Catalog #M1643/2161 Active trim set w/ backplates, levers,... More 


Hoppe Dallas Solid Brass Multipoint Trim Inactive Set

CODE: M1643/2161N

$170.40
Hoppe

Product Description: Dallas Solid Brass Multipoint Trim Inactive Set Catalog #M1643/2161 Active trim set w/ backplates,... More 


Hoppe Eurogroove Router Bit

CODE: 94-08-834

$84.00
Whiteside

Product Description: Eurogroove Router Bit for Hoppe Multipoint Catalog #94-08-834 This "eurogroove" router bit is used to... More 


Hoppe Manual Four Roller Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778883

$101.46

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Four Roller Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778891

$101.46
Hoppe

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Four Roller Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778887

$101.46

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Four Roller Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778895

$101.46

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roller/Shootbolt Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778835

$113.26

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roller/Shootbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778843

$113.26

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roller/Shootbolt Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778839

$113.26

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roller/Shootbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778847

$113.26

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roundbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778259

$153.54

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roundbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778139

$153.54

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roundbolt/Shootbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778751

$172.10

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Roundbolt/Shootbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778755

$172.10

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Shootbolt Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778339

$106.50

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Shootbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778335

$106.50

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Shootbolt Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778343

$106.50

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Shootbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778331

$106.50

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Shootbolt Gear for 60mm Backset, 25.4mm Deadbolt Throw

CODE: 2406514

$156.24

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Shootbolt Gear for 70mm Backset, 25.4mm Deadbolt Throw

CODE: 2406522

$156.24

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Tongue Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778159

$94.70

Step 5: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

4 item(s)

Hoppe Manual Tongue Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778147

$94.70

Step 5: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

9 item(s)

Hoppe Manual Tongue Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778167

$94.70

Step 5: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 


Hoppe Manual Tongue Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778075

$98.56

Step 5: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

18 item(s)

Hoppe Manual Tongue Gear for 60mm Backset, 25.4mm Deadbolt Throw

CODE: 2406346

$144.44

Step 4: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

8 item(s)

Hoppe Manual Tongue Gear for 70mm Backset, 25.4mm Deadbolt Throw

CODE: 2406371

$144.44

Step 4: The last step is to choose the bottom tongue position that matches your door. The bottom tongue position is measured from the center of... More 

10 item(s)

Hoppe Manual Tongue/Shootbolt Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778238

$93.32

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Tongue/Shootbolt Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778263

$113.26

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Tongue/Shootbolt Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778311

$82.00

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Tongue/Shootbolt Gear for 45mm Backset, 25.4mm Deadbolt Throw

CODE: 8778107

$113.26

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Tongue/Shootbolt Gear for 60mm Backset, 25.4mm Deadbolt Throw

CODE: 2406477

$163.00

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Tongue/Shootbolt Gear for 70mm Backset, 25.4mm Deadbolt Throw

CODE: 2406485

$163.00

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Two Roller Gear for 35mm Backset, 14mm Deadbolt Throw

CODE: 8778279

$94.70

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Two Roller Gear for 35mm Backset, 25.4mm Deadbolt Throw

CODE: 8778255

$94.70

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 


Hoppe Manual Two Roller Gear for 45mm Backset, 14mm Deadbolt Throw

CODE: 8778511

$94.70

Please note  that this item includes both the multipoint gear and the bottom extension, along with the appropriate stainless steel screws.... More 

Loading...